1
Share:
Specifications
| Square drive | : 1/2″ |
| Free speed | : 8000 rpm |
| Max. torque | : 800 N.m |
| Bolt Capacity | : 16 mm |
| Air Inlet | : ¼” |
| Air Hose Size | : 10 mm |
| Air Pressure | : 6-8 kg/cm2 |
Air tools use and maintain notice:
- This tool should use spindle oil or sartorius oil (sew machine oil), do not use common or recycle oil, or components will be destroyed.
- Air pressure should be at 6-8 kg/cm2 when tools work, lower air pressure would not be able to play tools capacity, higher pressure will rapidly reduce tools life.
- In order to keep normal operation, please install filters on air compressor, air regulator, lubricator.
- If there is no lubricator, should be oiling to machine specified mouth filling before and after working, so that can play the best function.
- Regularly check whether there is sewage or impurity on screen, if any, should obviate sewage and impurity timely. (usually once/ week)
- Check whether the leakage of air hose and fittings, and loose, to prevent low air pressure that enter into the pneumatic tool.
- Check pneumatic tools and pneumatic tools accessories whether there is a loose connection to prevent damage to tools or injury to person when adjust or rotate accessories.
- Non-pneumatic tools accessories are not allowed to use on pneumatic tools.
- In case the machine does not turn or rotation is not smoothly, please fill a large number of spindle oil or sewing machine oil in the oiling mouth, and boot-strap start rotate, cleaning dirt, obstacles for three or two times consecutively, if failure, please sent to dealers to rectified.
Inquiry - Rotake 1/2" Air Impact Wrench RT5232
